Double Glazed Window Repair
It's worth checking the warranty that comes with most double-glazed windows. It usually covers any problems with window hardware, such as hinges and locking mechanisms, within the first ten years.
Mist in between glass windows is usually caused by a breach in the seal, and it's something that requires immediate repair to prevent mould or damp from forming in your house.
Condensation Between the Windows
If condensation forms between the windows in your home, it is an indication that the seal securing the gas that insulates between the panes has failed. This is a serious problem that should be addressed immediately especially in winter when humidity is at its highest. It could also cause damage to sills or sealants and also cause mould.
RepairMyWindowsAndDoors -glazed windows should not have condensation between the panes. This issue could be caused by high humidity or a very cold snap. Fortunately, this is usually repaired without replacing the entire window. A professional can make tiny holes in the window and spray special cleaning solution inside. The moisture is then sucked out of the window and an anti-fogger system can be fitted to prevent any further buildup of moisture in the future.
Condensation can also occur between the windows due to air leakage, or other factors outside the window. In this instance, it may take longer for the condensation in the window to accumulate, since the air must be sufficiently warm to evaporate the water molecules. In these instances it might be more beneficial to replace the double-glazed windows rather than trying to repair the sealed units that are in place.
A double-glazed glass window composed of two or more pieces of tempered, insulated glass that are held together by a metal frame. The space between the windows is filled with an insulating gas such as argon or Krypton and then sealed. The seal is responsible for stopping the insulating gas from escaping and also prevents moisture and air from entering into the gap.
As windows get older, the seals weaken and allow moisture to leak into the gap between the glass panes. It is important to know the signs of leaks in the seals and this means that the double glazing isn't functioning as efficiently as it used to. This can result in poor energy efficiency, increased heating bills, damage to the properties and the risk of condensation between the windows.
Mist
If you see condensation on the outside of your windows, it is perfectly normal and means that your double glazing is functioning properly and retaining the heat in your home. The condensation occurs because the outside air is more warm than the glass and reaches its dew point before the window does. This is one of the great advantages of having high-quality double glazing.
If the condensation is located on the inside of your window, it could be a sign of a ventilation issue in your home. The excess moisture can't go anywhere else and will end up on the window, carpets, furniture, and other areas of your home. It is recommended to have this checked by a professional and making sure that there plenty of fresh air flowing through the home will help avoid it from happening again.
The other reason you might get mist in your double-glazed window is that the seal between the two panes has worn down. This could be due to wear and tear or by using chemical cleaning products. The most effective solution is to fix the windows as soon as you can.
The professional repair of your windows will ensure that they remain watertight and free from fogging, condensation and misting. It is also a lot cheaper than replacing them all the way through and it will save you money on your energy costs.
A registered window installer with FENSA can give you a quote to repair or replace your double-glazed windows. Upgrade your old windows to energy efficient ones that are A-rated if they are very old.
It is a good idea to retain copies of any warranties and agreements with your window installers. This will be very helpful if any problems with the windows arise in the future, and you can then contact your fitters to resolve these issues. This is better to ignore the issue and causing additional problems in your home.
The difficulty of opening or closing the door
It's not just annoying when double-glazed windows are difficult to open or close. They could also lead to more energy costs due to the loss of heat and drafts. It could also be security risk, particularly when the locks aren't functioning correctly. It is crucial to address any issues with double-glazed windows and doors when you spot them.
If you're unable to open your windows and have tried the simplest solution like using a screwdriver in order to break it open, or tapping the frame using a sharp object, then the issue might be more serious. The window could have moved and needs to be reset or there could be a gap between glass and frames. In either of these scenarios, you must contact a professional double glazing repair expert to ensure that the correct repairs are done and to prevent any further problems.
It's not uncommon to find UPVC window handle and lock mechanisms to become difficult to operate or get stuck, especially if they are old and worn. This is usually due to a build-up of dirt or grease in the handle. This can be easily resolved by cleaning it with a uPVC cleanser. If this doesn't work, try tapping the uPVC with the help of a screwdriver. Be careful not to damage either the handle or the window handle mechanism.
If this doesn't solve the issue then the window will have to be replaced because the hinges may no longer be in the correct position or the locking mechanism may be damaged. In this instance you should consult a UPVC window expert.
David The Window Wizard specialises in all technical aspects of double-glazed window and door repair including fixing a jammed or shut double glazing window. He has a wealth of experience converting discontinued window mechanisms to modern ones. This often can save you the cost of replacing the whole window. For more information or to book an estimate, call or email today.
Warping
Double glazed windows are often a great option for saving energy in your home. They are made up of two separate panes which contain a spacer or dense gas between them. This creates a seal that keeps cold air out and warm inside. However, over time windows can become damaged or break and require repair. Fortunately, the majority of these repairs are easy and can be done without the expense of replacing the entire window.
Warping is a common problem when double-glazed windows are installed. The windows begin to bow or twist or bow. This can affect the structural integrity and insulation properties of the windows. The best way to prevent this problem is to make sure that your double-glazed windows are properly installed and maintained regularly.
If your double glazed windows are starting to warp, it is essential to speak with a professional immediately to stop the problem from getting worse. They can inspect your windows and identify the cause of the warping. They will then utilize specific tools to correct the issue and make sure that your windows are sealed.
A common cause for this issue is water vapour between the windows, which can get accumulated over time. It can be caused by many different reasons including weather conditions, humidity and temperature variations. To fix this the expert will drill a small hole in the window to let out the moisture. They will then apply a cleaning agent to clean the glass and then apply an adhesive to keep it dry in the future.
If your windows can't be shut or opened it could be due to a malfunctioning mechanism or hinges. Before calling a professional to fix the issue, it's recommended to lubricate the parts. This can often resolve the issue and decrease your need for replacements. If your windows are quite old or do not provide the level of insulation that you'd like to have It is generally better to replace them.